Search

Exterior Finishing: Zinc Alloy

Products > Exterior Finishing > Zinc Alloy
Show All List Grid
#15 Zinc Double-V Control Joint

CORROSION RESISTANT EXPANDED FLANGE CONTROL JOINT

#15 Expanded Flange Control Joint (Double-V) is used to relieve stresses in large plastered areas of walls, ceilings, and stucco areas. The Double-V Control Joint counteracts the inherent…
Link
#1A Zinc Expanded Corner Bead

Expanded flange corner bead for exterior corners

A strong, all-purpose exterior corner bead with a solid nose and multiple general use purposes. The zinc finish provides superior corrosion resistance when compared with the galvanized steel…
Link
#2A Expanded Corner Bead

RIGID, Expanded flange corner bead for exterior corners

A more rigid expanded corner bead for reinforcing plaster/stucco corners when used with masonry and fire proofing beads and columns. The #2A Corner Bead provides extra strength and…
Link
#40 Zinc Two-Piece Expansion Joint

Two-piece expansion control joint

#40 Expansion Joint is a two-piece, slip joint that finishes butt ends of adjacent panels in tall or wide walls and ceilings to allow for multi-directional movement with increased corrosion resistance.
Link
#66N Zinc Short Flange Casing Bead

Short flange casing bead to terminate stucco or plaster edge

Used as a stucco/plaster stop to provide a screed edge and protective finish trim while terminating plaster in a clear, straight line at windows, doors, and other openings in…
Link
#66X Zinc Expanded Flange Casing Bead

Expanded flange casing bead or plaster stop

Used as a stucco/plaster stop to provide a screed edge and protective finish trim while terminating plaster or thin stone in a clear, straight line at doors, windows, and other openings where…
Link
#XJ15 Zinc Double-J Control Joint

Corrosion resistant Expanded flange control joint with a taped reveal

#XJ15 Expanded Flange Control Joint (Double-J) is used to relieve stresses in large plastered areas of walls, ceilings, and stucco areas when the highest degree of…
Link
093 Zinc Control Joint (ZNCJ)

Drywall or veneer plaster control joint

ClarkDietrich 093 Zinc Control Joint is applied between abutting gypsum panels and is used to relieve the stresses of expansion and contraction of drywall and veneer plaster systems in large ceiling…
Link
FHA-7 Weep Sill Screed

Exterior foundation WEEP (sill) screed 

The FHA-7 is for hard-coat stucco, thin-veneer stone, and 1-coat stucco over foam applications. Installed at the juncture of the sill and the exterior concrete foundation, it allows trapped…
Link
Zinc Control Joints #38, #50 & #75

Resists corrosion on applications of plaster and stucco

A solid flange zinc control joint that resists corrosion on interior and exterior applications of plaster and stucco. The #38, #50 & # 75 is used to relieve stresses in large…
Link
Zinc Mini-Bead™ 800 and 900

Corner reinforcement

Zinc Mini-Bead™ 800 and 900 are fine-mesh corner beads used to provide corner reinforcement for one-coat and two-coat veneer plaster systems. 1-1/4" wide fine-mesh flanges are tapered along the outer edges to…
Link